One item number, one colour run
The two loveseats and the wedge come from the same frame family, foam grade and cover run, so a shop floor or a project room does not end up with three dye lots meeting at the corner.
The 8310 is quoted and built as a single corner group: a left console loveseat (2R-L-C), a right console loveseat (2R-R-C) and a wedge. All three pieces share a 96 cm depth and a 103 cm back height, so the seating line stays level through the turn instead of stepping down. Each loveseat carries power motion, a console with cup control, and a light belt along the base. The two loveseats and the wedge come from the same frame family, foam grade and cover run, so a shop floor or a project room does not end up with three dye lots meeting at the corner. The console between the two seats of each loveseat holds the cup holders and the motion control, so nobody reaches down the outside arm to recline. The light belt runs under the base rail and draws the floor line of the group. Each loveseat packs at 171 x 76 x 65 cm, 58 kg net and 66 kg gross; the wedge at 150 x 83 x 65 cm, 23.5 kg net and 30 kg gross. A 40HQ takes 27 pieces of any one of those item numbers. The loveseats are 172 cm wide and the wedge 153 cm, all 96 cm deep. Set in an L, the group seats five across two consoles, with the wedge turning the corner at an angle instead of a hard ninety degrees. In an open-plan room the seating follows the walls rather than cutting a rectangle out of the floor. Buyers who want the same model as a straight run can order the 3RR three-seater at 224 cm, the 2RRC console loveseat at 199 cm and the 1RR single recliner at 107 cm instead. Those pieces are 95 cm deep and 104 cm high against 96 x 103 cm on the corner pieces, so the two builds are ordered as separate configurations rather than mixed in one run. Frames use high-strength timber or metal with S-spring support and layered filling cut to ergonomic patterns. Foam is virgin and powder-free at D28, D30 or D35 depending on the position. Covers can be specified in top-grain leather, faux leather, fabric, suede, waterproof fabric, woven rope, PU or EPU, in grey, brown, black or a custom colour. The group is shown here in black; the brown cover appears earlier on this page. Material and colour are specified per order. Compliance: frames and mechanisms are checked by third-party laboratories such as SGS and Bureau Veritas for REACH and RoHS; upholstery can be aligned to CA117 or BS5852 flame requirements for the destination market; core frames and wooden parts use FSC-certified timber. Model-level certificate copies can be provided on request.A Corner Group That Ships as One Order and Seats Five

What the corner group settles for a buyer
One item number, one colour run
Controls where people sit
Packing and loading stated per piece
Where the corner layout works

Who the 8310 is built for

8310 Specifications

Corner set pieces 8310-2R-L-C (left console loveseat), 8310-2R-R-C (right console loveseat), 8310-WEDGE Overall size W x D x H Loveseats 172 x 96 x 103 cm · wedge 153 x 96 x 103 cm Packing size Loveseats 171 x 76 x 65 cm each · wedge 150 x 83 x 65 cm Net / gross weight Loveseats 58 / 66 kg each · wedge 23.5 / 30 kg Loading capacity per 40HQ 27 pcs per item number Function per loveseat Power motion, console with cup control, light belt under the base rail Straight build alternative 8310-3RR 224 x 95 x 104 cm · 8310-2RRC 199 x 95 x 104 cm · 8310-1RR 107 x 95 x 104 cm, packing 221 / 196 / 104 x 77 x 65 cm Frame and seat build Pine and plywood frame, foam and pocket spring seat, fibre and shredded foam back, carton packed Why Choose PandaSofa?
Ordering information
