A Three-Piece Motion Set That Turns Its Middle Backrest Into a Table
The 8228 is a manual motion set built from three pieces: a three-seat sofa with a drop-down table in the centre backrest, a console loveseat, and a rocker recliner. Every piece reclines with a latch on the outside of the arm, so nothing in the set needs a power point behind it. Sizes, packing and loading below come straight from the factory packing list.
What Each of the Three Pieces Does
The Centre Backrest Folds Into a Table
The 3RRC three-seat sofa carries a drop-down table inside the middle backrest. Folded up it is a normal three-seater; folded down it holds drinks, a shared plate or a laptop, which keeps a separate coffee table out of the walking line.
A Loveseat With a Console, Not a Plain Two-Seater
The 2RRC is quoted as a motion loveseat with console. Two cup holders sit in the console top between the seats, so drinks stay upright when the footrests come up.
A Rocker Recliner as the Third Seat
The 1R is a single rocker recliner at 100 x 91 x 100 cm. It can close a U-shaped layout or sit on its own in a reading corner, and it still ships inside the same set.
Manual Recline, Chosen on Purpose
The latch sits on the outside of the arm where a hand falls naturally. There is no motor, no handset and no cable, which matters in three situations buyers keep raising:
Rooms with no socket behind the sofa
Rental apartments, older European flats and island layouts in open-plan floors often have no outlet on the seating wall. A manual set drops in without an electrician.
Hospitality and project furniture
A latch cannot lose a remote, and there is no control box to fail between guest stays. Fewer parts to service means a lower maintenance call rate over a room count.
Stock that has to move quickly
No electrical configuration means no voltage variant to hold per market, so one container can serve several destinations.
8228 Specifications
| Configuration | Three-piece set: 8228-3RRC, 8228-2RRC, 8228-1R |
| 8228-3RRC (motion sofa with drop-down table) | 216 x 91 x 100 cm; carton 216 x 76 x 76 cm; 71 / 79 kg |
| 8228-2RRC (motion loveseat with console) | 192 x 91 x 100 cm; carton 193 x 76 x 76 cm; 65 / 72 kg |
| 8228-1R (rocker recliner) | 100 x 91 x 100 cm; carton 100 x 76 x 76 cm; 33 / 38 kg |
| Loading per 40HQ | 20 sets on the 3+2+1 build; 23 sets on the sectional build |
| Frame and fill | Wood and plywood frame; pocket spring and foam seat; fibre back |
| Recline | Manual side latch on each piece |
| Packing | Box packing, one carton per piece |
Two Ways to Buy the Same Model
As the 3+2+1 set
One part number per piece, 20 sets to a 40HQ. Straight layouts against a wall or facing a screen.
As a sectional build
The same model is also built with a wedge corner and arm pieces, loading 23 sets to a 40HQ. Room shapes that need an L are covered without starting a new model.
With your own upholstery
The set is shown here in leather air match and in a grey fabric cover. Upholstery and colour are confirmed per order, so a dealer can align the set with an existing floor programme.
Who the 8228 Suits
Importers buying by the container
Three pieces, 20 sets per 40HQ on the set build. One order covers a full room display instead of three separate models to chase.
Retail chains and dealers
A dealer can show the sofa, the loveseat and the recliner together, then sell them apart. The console loveseat and the rocker both work as stand-alone SKUs.
Project and rental furnishing
Manual operation and box packing suit serviced apartments and staged show units, where the frame has to arrive flat-packed and go in without wiring.
Why Choose PandaSofa?
Since 2007Recliner manufacturing and export
50,000 sqmFactory floor, 8,000+ sets a month
150+Durability test procedures
100+Export markets served
PandaSofa runs its own R&D, manufacturing and sales, with an in-house quality inspection team on the line. Metal mechanisms are cycle-tested in house, and frames and wooden parts are cut to the ergonomic drawings for each model.
Ordering the 8228
- MOQ: One container (1x40HQ); One Model and Two colors; recommended order quantity
- Lead Time: Regular 30-45 days, expedited as fast as 25 days, subject to order volume and season
- Sampling: 15-25 days after details are confirmed
- Warranty: 2-year whole unit, 5-year wooden frame, lifetime metal frame
- Payment: T/T 30% deposit and 70% against shipment; L/C; D/P at sight
Ask for the 8228 packing list and upholstery options