One line item, one colour approval
The three pieces are produced from the same frame design, foam grade and cover run. A dealer does not have to reconcile three fabric dye lots or three finish samples before a floor set looks like a set.
The 8308 is built and sold as a matched set rather than three unrelated chairs. One purchase order covers a three-seater (3RRC), a loveseat (2RRC) and a single recliner (1R), all sharing the same frame, the same pocket-spring seat build and the same cover, so a retail floor or a project room is furnished from one colour approval and one container plan. The three pieces are produced from the same frame design, foam grade and cover run. A dealer does not have to reconcile three fabric dye lots or three finish samples before a floor set looks like a set. Each recliner opens with a side latch on the outer arm and closes under leg pressure. There is no motor, controller or cable, so a showroom, a rented unit or a second home can install the set without an electrician on site. A 40HQ holds 64 sets of 3RRC, 72 of 2RRC or 140 of 1R. Buyers can price and build a mixed container against real numbers instead of estimating from cubic metres. The set is sized for domestic living rooms rather than commercial lounges: the three-seater is 213 cm wide with 158 cm of seat width, the loveseat 158 cm with 106 cm of seat, and the single chair 103 cm with 50 cm of seat. All three share a 55 cm seat depth and 49 cm seat height, so the seating line stays level when the pieces are placed together or split across a room. In practice the three pieces are used three ways: a full living-room set, a two-piece combination for apartments where the single chair sits in a reading corner, or a matched row in a home theatre where the reclined footrests sit clear of the row in front. Frames use high-strength timber or metal with S-spring support and layered filling cut to ergonomic patterns. Foam is virgin, powder-free, at D28, D30 or D35 depending on the position. Covers can be specified in top-grain leather, faux leather, fabric, suede, waterproof fabric, woven rope, PU or EPU, in grey, brown, black or a custom colour. Compliance: frames and mechanisms are checked by third-party laboratories such as SGS and Bureau Veritas for REACH and RoHS; upholstery can be aligned to CA117 or BS5852 flame requirements for the destination market; core frames and wooden parts use FSC-certified timber. Model-level certificate copies can be provided on request.Three Pieces, One Shipment: Reclining Seating for a Whole Room

Why buyers take the set instead of three separate models
One line item, one colour approval
Manual recline, no power drop needed
Loading figures published per piece
Where the 8308 is used

Who the set is built for

8308 Specifications

Pieces included 8308-3RRC (three-seater), 8308-2RRC (loveseat), 8308-1R (single recliner) Overall size W x D x H 3RRC 213 x 99 x 105 cm · 2RRC 158 x 99 x 105 cm · 1R 103 x 99 x 105 cm Seat width 158 cm / 106 cm / 50 cm by piece Seat depth and height 55 cm seat depth, 49 cm seat height, 62 cm back height (all pieces) Packing size 212 x 76.5 x 65 cm · 186 x 76.5 x 65 cm · 100 x 76.5 x 65 cm Net / gross weight 65 / 70 kg · 55 / 60 kg · 35 / 38 kg Loading capacity per 40HQ 64 sets of 3RRC · 72 sets of 2RRC · 140 sets of 1R Frame and seat build Wood and plywood frame, pocket spring with foam seat, PU back, carton packed Why Choose PandaSofa?
Ordering information